Riverside County -Ca HP DesignJet T610 / T620 Repair | Service

            Error Code

                   Description /
Recommendation

Designjet T610, T620, T1100, T1120
error 01.0:YZ

HCI queue does not end after 2
seconds – problem with formatter and/or main board.

Designjet T610, T620, T1100, T1120
error 01.1:YZ

NVM backup: not found, read, write
or read back error.

Designjet T610, T620, T1100, T1120
error 01.2:YZ

Print mech PCA fault or NVM backup
failure.

Designjet T610, T620, T1100, T1120
error 02.1:YZ

Encoder seems to be wrong. (Code
YZ seems to be a more general error with the carriage.)

Designjet T610, T620, T1100, T1120
error 02.1:10

Seems to fail reading pens
voltage. (May need replacement of Carriage PCA, Trailing Cable or Main PCA)

Designjet T610, T620, T1100, T1120
error 02.2:YZ

Problem with the Carriage PCA.

Designjet T610, T620, T1100, T1120
error  03:YZ

Problem with Power Supply Unit.

Designjet T610, T620, T1100, T1120
error 05.1:YZ

CPU Fan is stopped or burnt.

Designjet T610, T620, T1100, T1120
error 06:YZ

Main NVM failure – not detected,
read/write failed or readback error.

Designjet T610, T620, T1100,
T1120  error 08:YZ

Problem with the Front Panel.

Designjet T610, T620, T1100, T1120
error 11:YZ

Trailing cable does not seem to be
detected.

Designjet T610, T620, T1100, T1120
error 12.n:YZ

Carriage and PCA Main doesn’t
detect pens.

Designjet T610, T620, T1100, T1120
error 21:YZ

Fail moving Service Station. (General
error)

Designjet T610, T620, T1100, T1120
error 21:13

Service Station is very dirty.
(May be the Print Heads are more worse after cleaning as before.)

Designjet T610, T620, T1100,
T1120  error 21.1:YZ

Service Station servo shutdown.

Designjet T610, T620, T1100, T1120
error 22.0:YZ

ISS left BPSO error. (Supplies 0,
1, 2)

Designjet T610, T620, T1100,
T1120  error 22.1:YZ

ISS left BPS1 error. (Supplies 3,
4, 5)

Designjet T610, T620, T1100, T1120
error 24:YZ

Ink Setup failure (Ink Delivery
System (IDS) Tubes purge failed.)

Designjet T610, T620, T1100,
T1120  error 26.n:YZ

Order of Ink Supplies incorrect.

Designjet T610, T620, T1100, T1120
error 27:YZ

An error has occurred in Printhead
detection.

Designjet T610, T620, T1100, T1120
error 29.n:YZ

An error has occurred in Printhead
detection.

Designjet T610, T620, T1100, T1120
error 31:YZ

An error has been detected with
the cutter.

Designjet T610, T620, T1100, T1120
error 38:YZ

An error has been detected with
the Media Output Tray.

Designjet T610, T620, T1100, T1120
error 41:YZ

Electrical fault or current limit
in Media-Axis Motor.

Designjet T610, T620, T1100, T1120
error 41.1:YZ

Electrical fault or current limit
in Media-Axis Motor.

Designjet T610, T620, T1100, T1120
error 42:YZ

Electrical fault or current limit
in Scan-Axis Motor.

Designjet T610, T620, T1100, T1120
error 44:YZ

Fan electrical fault, or not
connected.

Designjet T610, T620, T1100, T1120
error 45:YZ

An error with the Rewinder System
has been detected.

Designjet T610, T620, T1100,
T1120  error 47:YZ

Star wheels motor error.

Designjet T610, T620, T1100, T1120
error 48:YZ

PPS system failure.

Designjet T610, T620, T1100, T1120
error 51:YZ

Window Sensor failure.

Designjet T610, T620, T1100, T1120
error 52:YZ

The printer has detected a problem
with the Drop Detector.

Designjet T610, T620, T1100,
T1120  error 55:YZ

Problem with the Line Sensor. The
printer has detected a failure to access Line Sensor EEPROM.

Designjet T610, T620, T1100, T1120
error 56:YZ

Drive roller analog encoder sensor
fail or calibration failed.

Designjet T610, T620, T1100, T1120
error 58:YZ

The Line Sensor of the printer is
not functioning correctly. Either the line sensor shutter has failed to open,
there is a failure to communicate with the Line Sensor, the Line Sensor is
not calibrated correctly, or the firmware is not compatible with the Line
Sensor.

Designjet T610, T620, T1100, T1120
error 61:YZ

The file format is incorrect and
the Printer cannot process the job.

Designjet T610, T620, T1100,
T1120  error 62:YZ

PC Interface.

Designjet T610, T620, T1100, T1120
error 63:YZ

Input/Output problem through the
Network Card.

Designjet T610, T620, T1100,
T1120  error 64:YZ

Input/Output problem through the
USB port.

Designjet T610, T620, T1100, T1120
Fehler 65:YZ

Memory Driver Internal I/O error,
I/O Socket Manager Internal I/O error.

Designjet T610, T620, T1100, T1120
error 66:YZ

Cannot print file on current paper
type. The paper type has changed since the file was sent, so the file cannot
be printed on the paper type currently loaded.

Designjet T610, T620, T1100, T1120
error 67:YZ

Input/Output problem through a
Firewire Port.

Designjet T610, T620, T1100, T1120
error 68:YZ

Loss of engine counters tracking.

Designjet T610, T620, T1100, T1120
error 71:YZ

Out of memory failure.

Designjet T610, T620, T1100, T1120
error 71:19

Default Serial Number found in the
main and backup NVM. It seems that both the Print Mech PCA and Hard Disk
Drive have been replaced together.

Designjet T610, T620, T1100, T1120
error 72:YZ

Generic Firmware error.

Designjet T610, T620, T1100, T1120
error 73:YZ

Servo Error.

Designjet T610, T620, T1100, T1120
error 74:YZ

Error uploading firmware update
file.

Designjet T610, T620, T1100, T1120
error 74.1:YZ

Error uploading media profile
update file.

Designjet T610, T620, T1100, T1120
error 75.1:YZ

Preventative maintenance Kit #1
counter active. (Scan Axis Components, Ink Supply Tubes, Trailing Cable,
Carriage)

Designjet T610, T620, T1100, T1120
error 75.2:YZ

Preventative maintenance Kit #2
counter active.

Designjet T610, T620, T1100, T1120
error 75.3:YZ

Preventative maintenance Kit #3
counter active. (Cutter Assembly)

Designjet T610, T620, T1100, T1120
error 75.4:YZ

Preventative maintenance Kit #4
counter active.

Designjet T610, T620, T1100, T1120
error 76:YZ

Hard disk drive is full.

Designjet T610, T620, T1100, T1120
error 77:YZ

Web access application. the web
server is not functioning correctly.

Designjet T610, T620, T1100, T1120
error 78:YZ

Borderless printing not possible.
Setting ignored.

Designjet T610, T620, T1100, T1120
error 78:1:YZ

Media settings area missing in
media settings file.

Designjet T610, T620, T1100,
T1120  error 79:YZ

Generic Firmware error.

Designjet T610, T620, T1100, T1120
error 79.1:YZ

Recoverable firmware error that
does not stop the printing process.

Designjet T610, T620, T1100, T1120
error 81:YZ

Problem with paper advance.

Designjet T610, T620, T1100, T1120
error 81.1:YZ

Problem finding the Drive Roller
zero.

Designjet T610, T620, T1100, T1120
error 84:YZ

Back tension servo shutdown (roll
feeding).

Designjet T610, T620, T1100, T1120
error 85:YZ

Problem finding the Drive Roller
zero.

Designjet T610, T620, T1100, T1120
error 86:YZ

Possible paper jam.

Designjet T610, T620, T1100, T1120
error 87:YZ

Problem finding the Scan-axi
encoder reading.

Designjet T610, T620, T1100, T1120
error 93:YZ

Unable to pressurize the Ink
Delivery System.

Designjet T610, T620, T1100, T1120
error 94:YZ

Color calibration error.

Designjet T610, T620, T1100, T1120
error 94.1:YZ

Profiling algorithm failed.

Designjet T610, T620, T1100, T1120
error 98:YZ

Automatic backup print mode
enabled.